Subject | Text |
| 8255 is rather old, but it is cheap and has 3 x 8 I/O ports.
There is a lot written about this IC. |
| This fault is normally due to the painter IC on the SSB panel which can give you some very strange f |
|
VS45501 | I have the same tv with basically the same problem...but I am not able to fix my "3D" look in the co |
Hi | Even mine book is lost but i was able to get a soft-copy of it from the Internet, you will have to s |
Need help with a Philips 32PW840612R that won't start | When I turn it on the standby led is blinking and nothing happens. When I turn it of and on and trye |
Ilo PDP4210EA1 42" Plasma Black screen s-video to comp | Nice forum and after reading several post I'm getting closer but totally new at Plasma TV repair, so |
more info again | I've read more on this type of problem. It seems an easy response is to bring it to a certified repa |
Wharfedale 890 - PT92 Chassis | I have one of these sets, which is not responding to AV control signals:
Firstly, it does not ent |
Nokia Mono Plus II - Dead with Stand-by LED flashing | Hello!
I have a TV Nokia, chassis Mono Plus II for repair (first time I met this chassis).
It do |
| minnie,
I found another fuse blown. Thought I had check everything. I waited to reply until I got n |
Re: Sony ccd-trv43 camcorder no record picture | [quote:693d2c1452="wealthwise"]This just started today, I turn on the camcorder to record and and I |
| I had the same problem and I solved in this way (cut & paste from nl.hobby.video newsgroup messa |
icc19 | i
try in service mode and see if have any error option :?: |
Anyone have service manual for Philips 28CL6770/25Z | Hi
I need the service manual for the above set which uses the FL1.10AA chassis. I need it mainly |
Thinkpad T23 Power | Yes this would definately be a cap problem. they are faulty not alowing to discharge. Try unplugging |
service manual | Hello!
i search the service manual - electronic. My Unit is Siemens NCDC 2015. I want to install an |
Panasonic TV TX-25MD1 | I'm glad you managed to repair the t.v.
Like many other engineers I branched off to an alternative |
|
Painter IC | To get into the service menu with the remote type 062596, then press the status button ( i think it' |
| I know that you guys are trying to be helful. but, I have never seen an owner manual tell you that a |
Toshiba TV 14R21 (PWB-1386 Board) keeps power on and off | [quote:b8bfe93703="minnie"]Chech r216 10k ohm to see if it's burnt. If so you need to replace the re |
Bush tv (11ak45b5) Picture collaspe | Hi
I have been given a bush tv to have a look and and see if I can repair it. I am after so help |
Sony SLV-SE820G VCR | UK Model - Fault no front display and wrong functions on front buttons - I have replaced C701 and re |
I need the Service Manual for Philips 29PT8422/78R | Hi guys.
I've recently bought this TV (it's a black Cineos HDTV) and I wanted to access the servi |
Philips 32'' TV 32PT71B121 SSB Replacement | Hi,
I just found this great forum!
I've got a Philips 32'' TV that needs the SSB module replac |
Pioneer VSx-5900S | I do not get anything on FM or AM but the Vu meter shows a received signal as they fluxuate on left |
| [quote:b54fb7477b="vtech"]Not familiar with the specific unit, some mechanism loop basics to check |
| Correct. But, I've had to do it. Very very last option! So yes, your right. Don't cut it. |
Samsung TV CW29M064N EEPROM reset | Hi everybody,
I have committed a mistake, "playing" in the service menu... I activated a option w |
Sony KV-35V45, Bad CRT. Looking for short... | Hi. I tought i would start a new topic, since i've focused my problem and my questions are different |
NEC PX-42VP1G or 42PD1 or 42PD2 | hello. I have a problem with Power Board - not work at all. I changed the main Mofset and and check |